Intended Use - Dentsply Sirona CEREC Primemill Operating Instructions Manual

Dentsply Sirona
Operating Instructions CEREC Primemill
67 19 681 D3439
D3439.201.01.01.02 09.2019

Intended use

3.2
This device is used for computed-aided production of dental
restorations, abutments, parts of abutments and drilling templates for
implant placement.
This unit must not be used for any other purpose. If the unit is used for
any purpose other than the one mentioned above, it may be damaged.
Intended use also includes compliance with these Operating
Instructions and the relevant maintenance instructions.
CAUTION
Follow the instructions
If the instructions for operating the unit described in this document are
not observed, the intended protection of the user may be impaired.
For the USA only
CAUTION: According to US Federal Law, this product may be sold only
to or by instruction of physicians, dentists, or licensed professionals.
Dry processing
CAUTION
In the event of dry processing without a suction device, dust can be
created from the materials being processed. Breathing in this dust
can have associated health risks. As such, observe the information
and requirements of the suction device.
Dry processing is only permitted in conjunction with CEREC Suction
devIce 230 V or 120 V.
● CEREC Suction Device 230 V/120 V, ordered together with the unit:
REF 6569730.
● CEREC Suction Device 230 V/120 V, if ordered separately:
REF 6580786.
NOTE
Before using dry processing, verify the functioning, correct connection
and the tightness of the connections. All available suction openings
must be free.
NOTE
Before dry processing check that the CEREC suction device contains
a functioning HEPA fine-dust filter.
3 General description
3.2 Intended use
9