Replacing Old Units; Overview; Replacement Of Horizontally Mounted Old Units With An Adapter Plate - Dentsply Sirona Heliodent Plus Installation Instructions Manual

Dentsply Sirona
Installation Instructions Heliodent Plus
62 14 972 D 3507
D 3507.031.01.15.02 03.2018
10.3

Replacing old units

10.3.1

Overview

Explanation
It is possible to conceal the installation site of an old unit when installing
a Heliodent Plus.
● A special adapter plate is available for the purpose of replacing
horizontally mounted old units (e.g. the HELIODENT DS)
– See the section on "Replacement of horizontally mounted old
units with an adapter plate [ → 85]".
● The Heliodent Plus has a lower knock-out elongated hole for the
replacement of vertically mounted old units.
– See the section on "Replacement of vertically mounted old units
[ → 88]".
Prerequisites
● Regardless of their prior use, the existing drill holes and wall plugs
must comply with the installation regulations and must be checked by
the person performing installation.
● The different connection areas of the old units make it necessary to
relocate the existing electrical connections (e.g. concealed
installation) on-site.
10.3.2 Replacement of horizontally mounted old units with an
adapter plate
Explanation
The adapter plate (REF 62 42 254) serves to conceal an existing
installation site of a horizontally mounted old unit and provide the
threaded holes required to mount a Heliodent Plus.
Suitable old units
● HELIODENT DS
● HELIODENT MD
● Planmeca Intra
10 Appendix
10.3 Replacing old units
85