Overview / Compliance / Warnings / Precautions - Structural Concepts Harmony HMG3953 Installation And Operating Manual

OVERVIEW / COMPLIANCE / WARNINGS / PRECAUTIONS

OVERVIEW

These cases should be installed and operated
according to these instructions to insure proper
performance. Improper use will void warranty.

This unit is designed for the display of products in
ambient store conditions where temperatures and
humidity are maintained at a maximum of 75 °F
and 55% relative humidity.
COMPLIANCE

Performance issues when in violation of applicable
NEC, federal, state or local electrical codes are not
WARNING
ELECTRICAL
HAZARD
CAUTION
CAUTION

WARNINGS


PRECAUTIONS


This equipment MUST be installed in compliance with
all applicable NEC, federal, state and local
electrical and plumbing codes.
Risk of electric shock.
Disconnect ALL ELECTRICAL SOURCES before servicing.
LED lamps reflect specific size, shape and overall design.
Any replacements must meet factory specifications.
Fluorescent lamps have been treated to resist breakage
and must be replaced with similarly treated lamps.
If N.E.C. (National Electric Code) or your local code
requires GFCI (Ground Fault Circuit Interrupter) protection,
the use of a GFCI breaker is strongly recommended.
4
covered by warranty.
See compliance specifics below.
Following are important warnings to prevent
injury or death.
Please read carefully!
Following are important precautions to prevent
damage to unit or merchandise.
Please read carefully!
COMPLIANCE
WARNING
CAUTION
CAUTION
CAUTION