OVERVIEW / COMPLIANCE / PRECAUTIONS / WARNINGS / WIRING DIAGRAM
OVERVIEW
These Structural Concepts merchandisers are
designed to merchandise packaged and unpackaged
products at ambient temperatures.
Cases must be installed and operated according to
this manual's instructions to ensure proper
performance. Improper use will void warranty.
ATTENTION
CONTRACTORS
WARNING
ELECTRICAL
HAZARD
CAUTION
This equipment MUST be installed in compliance with
all applicable NEC, federal, state and local electrical codes.
Risk of electric shock. Disconnect power before servicing unit.
CAUTION! More than one source of electrical supply is
employed with units that have separate circuits.
Disconnect ALL ELECTRICAL SOURCES before servicing.
CAUTION! LAMP REPLACEMENT GUIDELINES
Fluorescent lamps have been treated to resist breakage and
must be replaced with similarly treated lamps.
LED lamps reflect specific size, shape and overall design.
Any replacements must meet factory specifications.
CAUTION! GFCI BREAKER USE REQUIREMENT
If N.E.C. (National Electric Code) or your local code
requires GFCI (Ground Fault Circuit Interrupter) protection,
you MUST use a GFCI breaker in lieu of a GFCI receptacle.
WARNING: This product can expose you to chemicals, including
Urethane (Ethyl Carbamate), which are known to the state of
California to cause cancer and birth defects or other reproductive
harm. For more information go to P65Warnings.ca.gov.
3
COMPLIANCE
Performance issues when in violation of applicable
NEC, federal, state and local electrical codes are not
covered by warranty. See below compliance specifics.
PRECAUTIONS & WARNINGS
This page contains important cautions and warnings to
prevent injury or death. Please read carefully!
COMPLIANCE
WARNING
Need help?
Do you have a question about the G Series and is the answer not in the manual?