OceanStor Dorado V3 Series
Parts Replacement
Figure 4-62 Removing a fan module
Step 4 Put the removed fan module into an ESD bag.
Step 5 Take the spare part out of its ESD bag.
Step 6 Open the handle of the spare part, insert the spare part into the empty slot, and close the
handle, as shown in
Figure 4-63 Installing a fan module
Step 7 Wait about one minute and check the status of the Running/Alarm indicator on the fan module
to determine whether the fan module is successfully installed.
of the Running/Alarm indicator on the fan module.
Issue 05 (2019-01-30)
Figure
4-63.
Copyright © Huawei Technologies Co., Ltd.
4 Replacing CRUs
Figure 4-64
shows the location
59