OceanStor Dorado V3 Series
Parts Replacement
Step 7 Take the spare part out of its ESD bag.
Step 8 Insert the BBU into the spare part until it clicks into place, as shown in
Figure 4-6 Installing a BBU
Step 9 Open the handle of the spare part, insert the spare part into the empty slot, and close the
handle, as shown in
Issue 05 (2019-01-30)
Figure
NOTE
The procedure for installing a DC power module is the same as that for installing an AC power module.
This step uses the AC power module as an example.
Copyright © Huawei Technologies Co., Ltd.
4-7.
4 Replacing CRUs
Figure
4-6.
15