Huawei OceanStor Dorado V3 Series Parts Replacement page 193

OceanStor Dorado V3 Series
Parts Replacement
Figure 5-105 Removing a power module
Step 4 Put the removed power module into an ESD bag.
Step 5 Take the spare part out of its ESD bag.
Step 6 Open the handle of the spare part, insert the spare part into the empty slot, and close the
handle, as shown in
Figure 5-106 Installing a power module
Step 7 Wait about one minute and check the status of the Running/Alarm indicator on the power
module to determine whether the power module is successfully installed.
the location of the Running/Alarm indicator.
Issue 05 (2019-01-30)
Figure 5-106.
Copyright © Huawei Technologies Co., Ltd.
5 Replacing FRUs
Figure 5-107 shows
185