Huawei OceanStor Dorado V3 Series Parts Replacement page 101

OceanStor Dorado V3 Series
Parts Replacement
Step 5 Remove components from the system subrack that you want to replace and reinstall them to
their original positions in the spare part.
Step 6 Remove the system subrack that you want to replace from the cabinet, as shown in
5-23.
1.
2.
Figure 5-23 Removing a system subrack
Step 7 Optional: Attach the nameplate and the Intel label to the same positions on the spare part as
those on the removed system subrack, as shown in
location, and b indicates the Intel label location.
Issue 05 (2019-01-30)
NOTE
Multiple different product model bars are included in the product. Select the one that contains identical
information to the product model bar on system subrack that you want to replace.
Open the mounting ear cover. Use a Phillips screwdriver to remove the M6 screws from
the system subrack.
Pull the system subrack out of the cabinet along guide rails and place it on the ESD table.
Copyright © Huawei Technologies Co., Ltd.
Figure 5-24. a indicates the nameplate
5 Replacing FRUs
Figure
93