Huawei OceanStor Dorado V3 Series Parts Replacement page 205

OceanStor Dorado V3 Series
Parts Replacement
2.
3.
Step 2 Install the spare part.
1.
2.
Issue 05 (2019-01-30)
Figure 5-119 Removing a disk module
Hold the ejector lever, and pull out the disk module for about 3 cm (1.18 in.). See step
(2) in Figure 5-119. Wait for at least 30 seconds until the disk module stops working.
Then remove the disk module from the quorum server. See step (3) in
Place the removed disk module in an ESD bag.
Take the spare part out of its ESD bag.
Fully raise the ejector lever and push the spare part into the chassis along the guide rails
until it does not move. See step (1) in
Copyright © Huawei Technologies Co., Ltd.
Figure 5-120.
5 Replacing FRUs
Figure 5-119.
197