Huawei OceanStor Dorado V3 Series Parts Replacement page 182

OceanStor Dorado V3 Series
Parts Replacement
You can proceed to next steps only when all items pass the pre-replacement check and the
replacement page is displayed. If any item fails, rectify the fault as prompted.
Step 2 Wear an ESD wrist strap.
Step 3 Remove a fan module, as shown in
1.
2.
Figure 5-96 Removing a fan module
Step 4 Put the removed fan module into an ESD bag.
Step 5 Take the spare part out of its ESD bag.
Step 6 Insert the spare part into the empty slot until it clicks into place, as shown in
Issue 05 (2019-01-30)
Press the latch on the panel to open the panel.
Press the latches on the fan module to pull out the fan module.
Copyright © Huawei Technologies Co., Ltd.
Figure 5-96.
5 Replacing FRUs
Figure 5-97.
174