Huawei OceanStor Dorado V3 Series Parts Replacement page 39

OceanStor Dorado V3 Series
Parts Replacement
Figure 4-28 Removing an AC power module
Step 5 Put the removed power module into an ESD bag.
Step 6 Take the spare part out of its ESD bag.
Step 7 Open the handle of the spare part, insert the spare part into the empty slot, and close the
handle, as shown in
Issue 05 (2019-01-30)
Figure
NOTE
The procedure for installing a DC power module is the same as that for installing an AC power module.
This step uses the AC power module as an example.
Copyright © Huawei Technologies Co., Ltd.
4-29.
4 Replacing CRUs
31