OceanStor Dorado V3 Series
Parts Replacement
2.
You can proceed to next steps only when all items pass the pre-replacement check and the
replacement page is displayed. If any item fails, rectify the fault as prompted.
Step 2 Wear an ESD wrist strap.
Step 3 Press latches on the expansion module to release the handles and pull out the expansion
module, as shown in
Figure 5-100 Removing an expansion module
Step 4 Place the removed expansion module into an ESD bag.
Step 5 Take the spare part out of its ESD bag.
Step 6 Open the handles of the spare part, insert it into the empty slot, and close the handles, as
shown in
Issue 05 (2019-01-30)
Check the status of the parts to be replaced.
Start SmartKit and choose Home > Storage > Parts Replacement > Parts
Replacement. On the Parts Replacement page, click FRU Replacement. Then
complete the check before the replacement as prompted. For details, see
an
FRU.
Figure
Figure
5-101.
Copyright © Huawei Technologies Co., Ltd.
5-100.
5 Replacing FRUs
5.1.3 Replacing
178