Huawei OceanStor Dorado V3 Series Parts Replacement page 199

OceanStor Dorado V3 Series
Parts Replacement
Figure 5-111 Removing a data switch
Step 5 Place the data switch to be installed in the cabinet, as shown in
1.
2.
3.
Figure 5-112 Installing a data switch
Step 6 Connect cables to the data switch and power it on.
Step 7 After the Power indicator is steady on, check whether each component is working properly.
l
Issue 05 (2019-01-30)
Slide the data switch into the cabinet along the guide rails.
Use M6 screws to secure the data switch in the cabinet.
Check that the data switch has been installed horizontally and screwed in tightly.
If yes, the data switch is successfully installed.
Copyright © Huawei Technologies Co., Ltd.
5 Replacing FRUs
Figure 5-112.
191