Huawei OceanStor Dorado V3 Series Parts Replacement page 44

OceanStor Dorado V3 Series
Parts Replacement
Step 5 Take the spare part out of its ESD bag.
Step 6 Open the handle of the spare part, insert the spare part into the empty slot, and close the
handle, as shown in
Figure 4-35 Installing a power module
Step 7 Wait about one minute and check the status of the Running/Alarm indicator on the power
module to determine whether the power module is successfully installed.
the location of the Running/Alarm indicator.
l
l
Figure 4-36 Running/Alarm indicator on a power module
Step 8 Confirm the replacement.
After the preceding procedure is complete, check services on the host for any storage-related
error. If any storage-related error is reported, contact Huawei technical support.
----End
Follow-up Procedure
Label the replaced power module to facilitate subsequent operations.
Issue 05 (2019-01-30)
Figure 4-35.
If the indicator is steady green, the power module is successfully installed.
If the indicator is steady red or off, the newly installed power module is faulty, the power
module slot is faulty, or the power module is incorrectly installed.
Copyright © Huawei Technologies Co., Ltd.
4 Replacing CRUs
Figure 4-36 shows
36