Huawei OceanStor Dorado V3 Series Parts Replacement page 164

Hide thumbs Also See for OceanStor Dorado V3 Series:
Table of Contents

Advertisement

OceanStor Dorado V3 Series
Parts Replacement
l
l
l
Precautions
l
l
l
Tools and Materials
l
l
l
Procedure
Step 1 Check status before replacement.
1.
2.
You can proceed to next steps only when all items pass the pre-replacement check and the
replacement page is displayed. If any item fails, rectify the fault as prompted.
Issue 05 (2019-01-30)
The BBU that you want to replace has been located.
NOTE
You can locate a component in either of the following ways:
l Locating a component based on alarms in DeviceManager: On the Alarms and Events page of
DeviceManager, view the help information and locate the component to be replaced.
l Locating a component based on the status of its alarm indicator: For details about the indicators on
different components, see indicator introduction in the Product Description specific to your product.
The two BBUs are installed in two power modules. Therefore, remove the power
modules before removing the BBUs.
When a BBU is being replaced, the power module where the other BBU resides is
working properly.
Remove and insert a BBU with even force. Excessive force may damage the appearance
or connectors of the BBU.
Remove only one BBU at a time.
A BBU must be replaced within three minutes. Otherwise, the system heat dissipation is
compromised.
ESD wrist strap
ESD bag
Labels
Check system status.
Start SmartKit and choose Home > Storage > Routine Maintenance > Health Check.
On the Health Check page, perform inspection as instructed. For details, see
Checking System
Status.
NOTE
If some items fail in the inspection, rectify the faults by performing the recommended actions in
the inspection reports. Ensure that all other parts except the parts to be replaced are working
properly.
Check the status of the parts to be replaced.
Start SmartKit and choose Home > Storage > Parts Replacement > Parts
Replacement. On the Parts Replacement page, click FRU Replacement. Then
complete the check before the replacement as prompted. For details, see
an
FRU.
Copyright © Huawei Technologies Co., Ltd.
5 Replacing FRUs
5.1.2
5.1.3 Replacing
156

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V300r001

Table of Contents