Huawei OceanStor Dorado V3 Series Parts Replacement page 206

OceanStor Dorado V3 Series
Parts Replacement
3.
Step 3 Wait until the disk indicator lights up, indicating that the spare part is powered on.
----End
Follow-up Procedure
Log in to the quorum server.
1.
2.
Issue 05 (2019-01-30)
Figure 5-120 Installing a disk module
Ensure that the ejector lever is fastened to the chassis beam, and lower the ejector lever
to completely insert the spare part into the chassis. See step (2) in
Run the qsadmin command to check whether the configuration page of the quorum
server software is displayed.
Q2qumrom:~ # qsadmin
start main!
Waiting for connecting to server...
admin:/>
– If the preceding command output is displayed, go to 2.
– If the preceding command output is not displayed, the configuration information
about the quorum server software has been lost. In this case, reinstall and configure
the quorum server software.
NOTE
For details, see the
Run the show server_ip command to check whether the connections between the
quorum server and storage devices are in Established state.
admin:/>show server_ip
Index Server IP
----- ---------------
1 192.168.6.31
2 192.168.7.31
Index Local IP
Port State
Copyright © Huawei Technologies Co., Ltd.
BC&DR Solution Product Documentation (Active-Active
Server Port
---------------
30002
30002
Local Port
5 Replacing FRUs
Figure 5-120.
DCs).
Remote IP Remote
198