Huawei OceanStor Dorado V3 Series Parts Replacement page 117

OceanStor Dorado V3 Series
Parts Replacement
Figure 5-36 Installing a controller
Step 9 Insert the removed interface modules to the empty slots until they click into place, as shown
in Figure
Figure 5-37 Installing an interface module
Step 10 Connect the cables as labeled.
Step 11 Wait about thirty minutes (a maximum of sixty minutes) and check the status of the Power
and Alarm indicators on the controller to determine whether the controller is successfully
installed, as shown in
l
l
Issue 05 (2019-01-30)
5-37.
Figure
If the Power indicator is steady on and the Alarm indicator is off, the controller is
successfully installed.
If the Power indicator is off or the Alarm indicator is steady on, the newly installed
controller is faulty, the controller slot is faulty, or the controller is incorrectly installed.
Copyright © Huawei Technologies Co., Ltd.
5-38.
5 Replacing FRUs
109