Huawei OceanStor Dorado V3 Series Parts Replacement page 24

OceanStor Dorado V3 Series
Parts Replacement
Figure 4-7 Installing an AC power module
Step 10 Insert the power cables.
l
Issue 05 (2019-01-30)
Secure the AC power cables with retention clips.
a. Press the locker of the retention clip outwards (as shown in a of step 1 in
4-8), and meanwhile slide the retention clip to the connection part of the AC power
cable (as shown in b of step 1 in
Figure 4-8 Securing the AC power cables with retention clips
b. Loosen the retention clip, as shown in step 2 in
c. Press the retention clip inwards to secure the connection part of the AC power
cable, as shown in step 3 in
Copyright © Huawei Technologies Co., Ltd.
Figure 4-8).
Figure
Figure 4-8.
4 Replacing CRUs
Figure
4-8.
16