Optional) Installing Antiseismic Kits - Huawei UPS5000-A User Manual

UPS5000-A-(60 kVA-120 kVA)-H
User Manual
Figure 3-25 Securing the chassis to the rack
Step 10 Reinstall the power units.
After you insert the power units, rotate the ready switch to locked
Step 11 (Recommended) Install a lock for the maintenance bypass switch, as shown in
----End

3.2.2 (Optional) Installing Antiseismic Kits

Step 1 Determine the positions for installing antiseismic kits based on the marking-off template.
Step 2 Drill holes for installing expansion bolts, and install expansion bolts.
Step 3 Move the UPS to the installation position over its castors.
Step 4 Remove the lower front panel of the UPS and PDU cover.
Step 5 Secure two antiseismic kits to the front and rear of the chassis using eight M6 screws and four
M12 screws.
Issue 05 (2020-01-10) Copyright © Huawei Technologies Co., Ltd.
3 Installation
state.
Figure 3-9.
58