UPS5000-A-(60 kVA-120 kVA)-H
User Manual
Figure 3-10 Marking-off template (Unit: mm)
(1) Edge of the
cabinet rear
Pay attention to the front and back edge lines of the cabinet, preventing incorrect location.
Step 2 Use a hammer drill to drill four holes for installing expansion bolts and then install four
expansion bolts in the holes.
shows how to install an expansion bolt.
Figure 3-11 Expansion bolt
(1) M12 bolt
Issue 05 (2020-01-10)
(2) Mounting holes for
antiseismic kits
Figure 3-11
(2) Spring washer
Copyright © Huawei Technologies Co., Ltd.
(3) Mounting holes for L-shaped
brackets
shows the expansion bolt composition.
(3) Flat washer
3 Installation
Figure 3-12
(4) Expansion sleeve
48