Neutral Release Lever; Engine Switch (Ignition Switch) - TOHATSU BFT 80A Owner's Manual

CONTROLS AND FEATURES (R type)

Neutral Release Lever

(R1 type)
REMOTE CONTROL LEVER
NEUTRAL
RELEASE LEVER
(R2 type)
REMOTE CONTROL LEVER
The neutral release lever is set on the
remote control lever to prevent an
accidental operation of the remote
control lever.
The remote control lever does not
operate unless it is moved while
pulling the neutral release lever up.
34

Engine Switch (Ignition Switch)

(R1 type)
This remote control is equipped with
an automotive type ignition switch.
On the side-mount type (R1 type), the
engine switch locates on your side
near the remote control box.
NEUTRAL
On the panel-mount type (R2 type)
RELEASE
LEVER
and the top-mount type (R3 type), the
engine switch locates at the center of
the switch panel.
Key positions:
START:
ON:
OFF:
(R2, R3 types)
START
ON
ENGINE
OFF
SWITCH KEY
(IGNITION
SWITCH KEY)
Do not leave the engine switch
(ignition switch) ON (key in ON
position) when the engine is not
running as the battery will
discharge.
The starter motor will not work
unless the remote control lever is in
the NEUTRAL position, and the clip
to start the engine.
is in the emergency stop switch.
to run the engine
after starting.
to stop the engine
(IGNITION OFF).
ON
OFF
ON
OFF START
ENGINE SWITCH KEY
(IGNITION SWITCH KEY)
START