Product Description - Otto Bock 757M20 Series Instructions For Use Manual

1 Foreword
INFORMATION
Date of last update: 2018-10-02
► Please read this document carefully before using the product.
Instruct the user in the proper and safe use of the product.
►
► Please contact the manufacturer if you have questions about the product (e.g. regarding the
start-up, use, maintenance, unexpected operating behaviour or circumstances). Contact
information can be found on the back page.
► Please keep this document in a safe place.
The product "757M20=* Myo cuff" is referred to as the product/cuff below.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
The product may not be transferred to the patient without prior instruction.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.

2 Product description

2.1 Function
The product is intended to determine the suitability of a patient for using MyoPlus control. The
product cannot be used to control a prosthesis.
The product is a flexible armband that is applied to the end user's sound limbs.
The product measures the patient's control signals and assigns them to the prosthesis move­
ments.
2.2 Design
The product consists of the following components:
1
3 Application
3.1 Indications for use
The product is to be used exclusively for exoprosthetic fittings of the upper limbs.
3.2 Conditions of use
The product is to be used exclusively for the period of end user evaluation and training.
3.3 Indications
• For patients with unilateral and bilateral amputations.
1. Remote electrode dome
2. Textile cuff snap fasteners
3. Charging receptacle and battery
4. Textile cuff
5. Housing for remote electrodes and battery
6. Housing and MyoPlus TR
7. Nameplate
English
15