Cleaning And Care - Otto Bock 757M20 Series Instructions For Use Manual

→ The end user licence agreement (EULA) is displayed.
2) Accept the end user licence agreement (EULA). If the end user licence agreement (EULA) is
not accepted, the Myo Plus app cannot be used.
3) The "Bluetooth connection" menu item is opened.
4) Tap to establish a connection.
5) Select the desired component from the list.
6) Enter the Bluetooth PIN code and tap "Connect".
→ The symbol is displayed when the connection has been established.
→ Once the connection has been established, the data are read from the component. Then the
radar chart is displayed.
9 Use
9.1 Evaluating muscle signals in the MyoPlus app
2
9.2 Display of the current charge level
The battery charge level can be queried at any time.
1) With the product switched on, press the charging receptacle button and hold for less than
one second.
2) The LED display on the charging receptacle provides information on the current battery
charge level.
9.3 Safety Shutoff
The purpose of the safety shutoff is to protect the battery; it is triggered in case of:
• Excessively high or low temperature during the charging process
• Short circuit
• Overvoltage or undervoltage
INFORMATION
After a safety shutdown, the battery charger must be connected to reactivate the electronics.

10 Cleaning and care

CAUTION
Reuse on another user without corresponding cleaning of the product
Skin irritation due to soiling of the product by a previous user.
► Only use the product on one user for the duration of a fitting.
20
To perform an evaluation of the muscle signals or for training, the
following steps have to be completed:
1) Press the charging receptacle button and hold for one second.
→ The product is switched on.
→ Two short beeps are emitted.
2) In the app, tap the "Myo Cuff" menu.
3) Select the desired hand that was chosen in the planned fitting.
→ Now the muscle signals can be evaluated and trained.