Product Description - Otto Bock Ipso Cast 743G15 Instructions For Use Manual

2 Product description

1
The 743G15 Ipso Cast was designed for installation in the 743A11 Ottobock plaster device and
for producing a plaster cast for transtibial residual limbs. The product's main components are an
adapter as well as casting tubes, retaining rings and adapter rings in three different sizes.
The product is intended exclusively for use in an orthopaedic workshop.
Allowable body weight (
CAUTION
Excessive strain on the product
Risk of injury due to breakage of load-bearing components and functional limitations
Make sure that only the allowable body weight is applied to the product.
►
1
)
17