4.10 Connecting the AEC cable of the DB-220 display
This procedure describes how to connect the AEC cable of the DB-220 display.
How to connect the AEC cable?
1. Detach the tape (S) which secures the AEC cable (C) to the backside of the top segment.
Image 4-49
2. Open the slide door of the left cabinet and connect the AEC cable with the left connection pin inside the cabinet as illustrated.
Image 4-50
3. Close the cabinet door.
Image 4-51
R59770240 DB-220 11/06/2009
4. Physical installation of the DB-220 Display
C
S
55