Elitrace (Optional); Usb Pen Drive - W&H Lexa PLUS Instructions For Use Manual

Getting started
On the homepage, tap
1
Tap your user name.
2
Enter your current PIN and tap
3
Tap .
4
Enter your new PIN and tap
5
message with your new PIN appears.
Tap and then to go back to the previous page.
6
WHAT TO DO IF YOU FORGET YOUR PIN
If...
you are a common user
you are the administrator

EliTrace (optional)

FUNCTION AVAILABILITY
To access the EliTrace functions a special code must be entered. The
special code is required only at the first access to the EliTrace(
menus: after the code was entered, the function is enabled and
there is no need to enter the code again.
36
> >
to confirm.
to confirm: a confirmation
Then...
contact the administrator
contact your authorized service provider
If you want to disable the function another special code must be
entered.
Note: for more information contact your dealer.
DESCRIPTION
EliTrace allows to know exactly which instruments were sterilized
and link them to a specific cycle.
ACCESS TO ELITRACE
For the EliTrace access proceed as follows:
On the homepage tap
1
Note: for more information see the dedicated documentation.

USB pen drive

DESCRIPTION
A USB pen drive is available to be installed in order to automatically
record all the sterilization cycle reports. The USB pen drive can be
inserted equally into the front or rear port.
Notice: Periodically remove the USB pen drive to save the cycle data
)
on a computer or on another safe support.
Lexa PLUS | Instructions for Use | RIS-311 ENG Rev03 | 29/08/2022 | © W&H Sterilization Srl
> >