Snmp Parameters - Transition Networks STACKMASTER TR SMHB-TR-16 User Manual

SNMP Parameters

USER'S GUIDE
To set the SNMP parameter values:
1. To access the SNMP Parameters Menu, at the Network
Parameters MAIN> prompt, type and enter:
MAIN> snmp
The StackMaster™TR 16-Port SNMP Parameters Menu comes up to
provide guidance in setting parameters for data to be used by the external
SNMP network management software:
commwrite
auth
sysname
location
Select a parameter [main ==> root menu OR ? ==> help]
SNMP >
2. Referring to the Site Configuration Data Sheet, type and enter
modified configuration values in the format:
SNMP> <parameter> = <value>
3. Verify the modified configuration values by bringing up the same
menu:
MENU> snmp
The menu is redisplayed with the modified values.
3. Save the configuration values by typing and entering the
following
SNMP> save
SNMP> restart
SNMP> quit
The StackMaster™TR 16-Port restarts and the parameter values entered
are written to non-volatile memory.
3 3 . . I I N N S S T T A A L L L L A A T T I I O O N N
SNMP Parameters Menu
= PRIVATE commread
= DISABLE trap
= NONE contact
= NONE
= PUBLIC
= 0.0.0.0
= NONE
3-11