Setting Network And Snmp Parameters; Network Parameters - Transition Networks STACKMASTER TR SMHB-TR-16 User Manual

Setting Network and SNMP Parameters

Network Parameters

3-10
SNMP Network Management is configured by setting network and SNMP
parameter values.
To set the Network parameter values at an attached terminal:
1. At the StackMaster™TR 16-Port Configuration Main Menu MAIN>
prompt, type and enter:
MAIN> ip
The StackMaster™TR 16-Port Network Parameters Menu comes up:
ipaddr = 192.251.144.253
submask = 255.255.255.0
router = 0.0.0.0
Select a parameter [main ==> root menu OR ? ==> help]
IP>
2. Referring to the Site Configuration Data Sheet, type and enter
modified configuration values in the format:
IP> <parameter> = <value>
3. Verify the modified configuration values by bringing up the same
menu:
IP> ip
The menu is redisplayed with the modified values.
4. Save the configuration values to non-volatile memory by typing
and entering:
IP> save
IP> restart
IP> quit
The StackMaster™TR 16-Port restarts and the parameter values entered are
written to non-volatile memory.
Network Parameters Menu
name = NONE
domain = NONE
nameserver= 0.0.0.0
StackMasterTR