Adding/Editing A Channel - Codan NGT AR Getting Started Manual

Using Quick Start

Adding/Editing a channel

66
If you have option TxD enabled, you are not
able to program transmit frequencies.
NOTE
If you have option TxP enabled, this entry is not
available.
To add or edit a channel:
1
Open Quick Start.
1
Scroll to Add/Edit channel, then press
1
Enter the name of the channel that you want to create,
then press
NOTE
If you want to use an existing channel, scroll to the
channel, then press
1
Enter the receive frequency in kilohertz, then press
NOTE
1
Enter the transmit frequency in kilohertz, then press
1
Scroll to the mode combination you want to use, then
press .
The transceiver returns to Quick Start.
1
If you want to add/edit more channels in your
transceiver, scroll to Add/Edit channel and repeat this
process.
.
For help with entering text see
Entering and editing
.
You can enter the frequency to three
decimal places. Press
point, then continue with entering the
frequency.
NGT Transceiver Getting Started Guide
.
page 61,
text.
*
to enter a decimal
.
.