Editing A Channel - Codan 2110 Reference Manual

The Channel List
1
Renaming a channel
When you rename a channel, references to the channel in other lists are not automatically
updated; you need to go to the Address, Network and Phone Link Lists and update any
references to the channel.
For example, if the channel you renamed is used in a network, go to the channel/mode
list for the network, find the reference to the old channel name, then edit it so that the
new name is displayed (for help see
the reference to the channel, the channel will not be scanned when scanning is switched
on.
Renaming a channel is a standard list function. For help see
in a
Copying a channel
Copying a channel is a standard list function. For help see
list.

Editing a channel

Editing a channel is a standard list function. For help see
list.
Deleting a channel
Deleting a channel is a standard list function. For help see
from a
120
If this prompt is
displayed...
Mode
The new channel is created and the List Manager remains open.
If you want to view the channel you have created, press
Manager.
If you disabled the transmit frequency, dashes are displayed in place
NOTE
of the transmit frequency.
list.
list.
Do this...
• enter a mode
If multiple modes can be added to the
channel, select the new mode and press
NOTE
If you do not want to add another mode,
press .
page 129, Editing a
2110 SSB Transceiver Reference Manual
to close the List
network). If you do not update
page 98, Renaming an entry
page 99, Copying an entry in a
page 99, Editing an entry in a
page 100, Deleting an entry
.