Panasonic CF-19ADUAX M Series Service Manual page 73

7.2.18. Assembling the Each Cover
1. Fix the Battery Lid Ass'y, the HDD Lid Ass'y, and the
PCMCIA Lid Ass'y using the 6 Screws. <K12-16>
2. Set the Rear Cabinet.
3. Fix the Modem/LAN Lid Rubber, the LAN Lid Rubber, the
USB Lid Rubber, the DC IN Lid Rubber, the Serial Lid
Rubber, the RGB Lid Rubber, the Audio Lid Rubber and
USB Lid Rubber 2 using the 14 Screws. <K14-8>
Note:
Tighten the Screws in the numbered order (No1 to No14).
Screws <K12-16> : DRQT26+D3KLT
Screw <K14-8> : DRHM5025YAT
DC-IN Lid Rubber
USB Lid Rubber
1394 Lid Rubber
Modem Lid Rubber
LAN Lid Rubber
<K14-8>:No.12
<K14-8>:No.13
<K14-8>:No.14
<K12-16>
<K12-16>
<K12-16>
<K12-16>
BAT Lid
Ass'y
HDD Lid Ass'y
Audio Lid
Rubber
USB Lid
Rubber 2
RGB Lid
Rubber
<K14-8>:No.6
<K14-8>:No.5
<K14-8>:No.4
<K14-8>:No.3
<K14-8>:No.2
<K14-8>:No.1
<K14-8>
:No.11
<K14-8>
:No.10
<K14-8>
:No.9
<K14-8>
:No.8
<K14-8>
:No.7
Serial
LID Rubber
<K12-16>
PCMCIA Lid Ass'y
7-51