Panasonic CF-19ADUAX M Series Service Manual page 67

7.2.16. Setting the Touch PAD and Key-
board
1. Connect the FPC of Touch PAD to the Connector
(CN800), and attach the Touch PAD to the computer.
2. Set the Click Button Plate.
3. Attach the new TP WP Sheet over the Touch PAD.
4. Attach the Palm Rest Ass'y on the computer.
Keyboard
FPC
TP WP Sheet
Touch PAD
Click Button
Plate
Connector
(CN800)
5. Connect the FPC of the Keyboard to the Connector
(CN18) on the Main PCB.
6. Fix the KBD CNT Lid using the 3 Screws. <N1>
<N1>:No.1
<N1>:No.3
<N1>:No.2
KBD CNT Lid
Keyboard
Keyboard
Connector
(CN18)
7-45
7. Set the Keyboard to the computer.
1
2
8. Fix the Keyboard Plate(L),(R) using the 4 Screws. <N9>
<N9>:No.1
<N9>:No.2
Keyboard
Plate(L)
Palm Rest Ass'y
Note:
Tighten the Screws in the numbered order (No1 to No3).
Tighten the Screws in the numbered order (No1 to No4).
Screws <N1> : DFHE5025XA
Screws <N9> : DRSB2+5FKK
3
Keyboard
<N9>:No.3
<N9>:No.4
Keyboard
Plate(R)