Panasonic CF-19ADUAX M Series Service Manual page 55

■ Assembly of Main Unit
S1: S2:
S4: S5:
S1:Insulation S2:Pinching Cables
CAUTION
S3:Sharp Edge S4:Check Parts NO. S5:Others
FFC(Audio) Ass'y
Stiffening
FFC(Audio) Plate Side
Upper and
lower direction
Match to the
center of FPC.
±3mm
Insulation
Sheet
0~1mm
<Screw tightening torque>
Screw(N19) = 0.2 ± 0.02N·m( 2.0 ± 0.2kgf·m)
<Screw tightening order>
Screw(N19) = →
Screw(N41) =
→ →
→ →
S3:
Screw(N41)
FFC(Audio) Ass'y
Insert before Insert before Insert before
setting the Main setting the Main setting the Main
PCB. PCB. PCB.
Fold
Apply the lubricant
back.
(sub material) on the
HDD Connector for
about 1 second.
(Be careful about
spraying around
when applying.)
WLAN Half Thermal Plate WLAN Half Thermal Plate WLAN Half Thermal Plate
Attach to the center of Module. Attach to the center of Module. Attach to the center of Module.
Details of "A"
→ → →
Screw(N41)
Insert and then lock.
PR PCB
Ass'y
Wireless LAN Module Wireless LAN Module Wireless LAN Module
A
Insert and then lock.
After connector lock, make sure
the FPC does not run over the
Bottom Case dispense part
(See the above fig.)
Be careful not to damage the
Stiffening Plate and Connector.
7-33
Insert
Screw(N41)
Screw(N41)
Screw(N41)
Screw(N41)
Screw(N19)
Screw(N19)
Screw(N41)
Screw(N41)
S4 Safety work
Main PCB Ass'y
FPC
Bottom Case
Dispense part
A part cross-section