Panasonic CF-19ADUAX M Series Service Manual page 27

Connector(CN2)
Antenna Cable(blue)
RF-IF PCB
<N19>
5. Disconnect the Antenna Cable(blue) from the Clamper.
6. Disconnect the Antenna Cable(blue) from Connec-
tor(JK1).
7. Remove the 4 Screws. <N19>
8. Disconnect the FPC(BT) from the Connector (CN604).
9. Remove the 2 Screws. <N19>
10. Disconnect the FPC(BT) from the Connector (CN2) and
remove the BT PCB and RF-IF PCB.
Screws <N41> : XSB2+5FNL
Screws <N19> : XSB2+3FNL
7.1.9. Removing the Audio PCB
Audio PCB
1. Remove the 3 Screws <N41>.
2. Disconnect the FFC(Audio) from a Connector (CN901).
3. Remove the Audio PCB.
Screws <N41>:XSB2+5FNL
<N19>
BT PCB
Connector(JK1)
FFC(BT)
RF-BT Plate
Connector(CN604)
<N19>
<N19>
Clamper
<N41>
<N41>
<N41>
Connector(CN901)
FFC(Audio)
7.1.10. Removing the Main PCB, Express
PCMCIA Combo Slot, Wireless LAN
Module, Modem Module, Lithium
Coin Battery, SD-LAN PCB, PR
PCB, EXT ANT PCB
Connector(CN8)
Note:
This procedure is not necessary if the computer is not
equipped with Wireless LAN Module or Modem Module.
1. Disconnect the 2 LCD Cables. (CN8,CN17)
EXT ANT PCB
Gray Cable
2. Remove the gray, black and white Antenna Cables.
3. Remove the 2 Screws <N3> and the 3 Screws <N41>.
4. Remove the 2 Screws <N3>, and remove the PR PCB
Ass'y, DU CNT Angle and EXT ANT PCB.
7-5
Connector(CN17)
<N3>
PR PCB
<N3>
<N41>
<N41>
<N41>
DU
CNT Angle
<N3>
<N3>
White Cable Black Cable