Panasonic CF-19ADUAX M Series Service Manual page 63

■ Assembly of Bottom Case Ass'y
Not when attaching
DU CON Sponge and DU Spring.
Match 4 claws to the
Connector edge and insert.
Match the notch due
to the direction.
* Screw Locations
Screw(N10)
Fix in the order.
(In the order of ~
<Screw tightening torque>
Screw(N10) = 0.2 ± 0.02N·m ( 2.0 ± 0.2kgf·cm)
Set the Bottom Case Ass'y
to the Top Case and insert
each Lid into the Top Case.
DU Spring DU Spring DU Spring
DU CON DU CON DU CON
Sponge Sponge Sponge
)
*Note: Check that the DU Spring and DU CON Sponge inserted into
the PR PCB are in the correct positions, and then set the bottom.
Bottom Case Ass'y
Note:
Slide vertically toward
the Top Case to attach.
This is because the
mounted parts on the
Main Board may be
damaged if forcibly
attached.
7-41
When setting
the Bottom,
do not remove
the jigs from
the Modem
and LAN
Connectors.