Panasonic CF-19ADUAX M Series Service Manual page 30

2. Disconnect the Power SW Cable from Connector
(CN804).
3. Disconnect the FFC(PAD) from Connector (CN802).
4. Remove the 4 Screws <N1>.
5. Remove the PAD PCB.
SW PCB
Operation Sheet
6. Remove the Operation Sheet and the SW PCB.
Screws <N1> : DFHE5025XA
7.1.15. Removing the Display unit
LCD Hinge Cover
<N1>
<N1>
1. Remove the 4 Screws <N1>.
2. Remove the LCD Hinge Cover.
<N1>
<N1>
7-8
Display Unit
<N9>
3. Display unit is half-rotated and removes the 2 Screws
<N9>.
4. Remove the 4 Screws <N18>.
5. Turn the computer over.
6. Remove the Display Unit.
Screws <N1> : DFHE5025XA
Screws <N9> : DRSB2+5FKK
Screws <N18> : DXYN4+J8FNL
Hinge Top Cover Ass'y
<N9>
<N18>
<N18>
<N18>
<N18>