Table of Contents
Advertisement
■ Assembly of LCD Unit Ass'y - 1
*Notice
·Affixing load value of the affixed.
20~30N(2.0~3.0Kgf)
<Screw tightening torque>
Screw(E36-15) = 0.16~0.20N·m(1.6~2.0kgf·m)
<Screw tightening order>
Screw(E36-15)
0~1mm
Tape
Attach.
Attach.
Attach.
LCD Side Cushion Right
Attach between the ribs
on the side of Frame.
The form of the left and
the right isn't symmetrical.
Insert this between
LCD PCB & LCD Farme.
0~1 mm
from IC
Insulation Sheet
Attach the Tape in the middle
between the PCB and Digitizer.
LED PCB Ass'y
LED PCB
Remove the Release Paper
on the back side and attach it.
LED PCB Ass'y
After inserting the
Connector, slide
the claw to lock.
Screw(E36-15)
LCD PCB Spacer Ass'y
Screw(E36-15)
Screw the PCB
and the Spacer
together.
Asymmetric shape
Attach so the concave
part comes here.
LCD Back Cushion
Match to the center
from right and left to
attach ±1 mm.
Match to the
Match to the
Match to the
upper end.
upper end.
upper end.
0~0.5mm
0~0.5mm
0~0.5mm
Match to the
Match to the
Match to the
positioning rib.
positioning rib.
positioning rib.
0~0.5mm
0~0.5mm
0~0.5mm
LCD Side Cushion Lower
Digitizer Ass'y
7-15
LED PCB Fix Sheet
Cross-section
view A-A'
Insert the upper part of
Digitizer Ass'y to the Plate.
Digitizer Ass'y
LED Thermal Diffushion Plate
Insert to the Digitizer as
illustrated above to attach.
LED Thermal Diffushion Plate
A
A'
Screw(E36-15)
Digitizer Ass'y
Screw(E36-15)
Screw the PCB
and the Spacer
together.
LCD Side Cushion Lower 2
Insulation Sheet
0~1 mm
from PCB edge
Attach the Tape in the
middle between the
PCB and Digitizer.
Fit to the top
edge of Plate.
0 0.5mm
0~1 mm
from the Tab
Advertisement
Table of Contents
