Table of Contents
Advertisement
LCD Cable Protecter
Lock Plate Ass'y
Step1
Lock Spring
Attach the Spring to the Hinge as shown.
Step2
Lock Plate Assy
Attach the Lock Plate to the Hinge as shown.
Affixed to the bottom snug against the
R portion of the Lock Plate with LCD Cable Protector
2.5
2.5 ± 0.5mm
Step3
Hinge Top Cover Ass'y
Hinge Top Cover Ass'y
Hinge Top Cover Ass'y
Attach the Hinge Top Cover Ass'y to the
Hinge as shown.
Step4
Rotation
Rotation
Rotation
Direction
Direction
Direction
Rotate the Hinge part in the arrow direction
as shown.
7-21
Step5
Process in the order of
black/white/blue/gray
LCD Rear Side
/green Cables from
the left.
(This process is not
needed if there are no
Cables.)
Hinge Cable Holder
After setting the Cable to the notch,
set to the Hinge Cover claw.
Advertisement
Table of Contents
