Panasonic CF-19ADUAX M Series Service Manual page 65

■ Preparation of DIMM
Attach the Heat Dissipation Sheet
on both sides of the DIMM card
on the lower side.
0~1mm
Match to the hole end. Match to the hole end. Match to the hole end.
±1 mm ±1 mm 1 mm
DIMM Thermal Sheet
■ Attaching of EZC Lid Ass'y
<Screw tightening torque>
Screw(N6) = 0.2 ± 0.02N·m ( 2.0 ± 0.2kgf·cm)
<Screw tightening order>
→ →
Screw(N6) =
EZC Lid Ass'y
Remove the Release Paper
and attach to the DIMM Card.
Screw(N6)
→
Screw(N6)
DIMM
Back
side
Remove the Release Paper
and attach to the DIMM Card.
Screw(N6)
Screw(N6)
7-43