Panasonic CF-19ADUAX M Series Service Manual page 28

<N8>
<N8>
FPC(SD LAN)
Connector(CN882)
<N41>
<N41>
Connector(CN15)
5. Remove the 2 Screws <N8>, and remove the HDD
Guide.
6. Remove the 2 Screws. <N41>
7. Disconnect the FPC(Battery) from the Connector. (CN15)
8. Remove the FPC(Battery) Ass'y.
9. Remove the 3 Screws. <N19>
10. Disconnect the FPC(SD LAN) from the Connector
(CN882 and CN21), and remove the SD-LAN PCB.
WLAN Half
Thermal Plate
DIMM
<N19>
Holder
<N19>
<N19>
Wireless LAN Module
Connector
(CN19)
11. Disconnect the Cable of Lithium Coin Battery from the
Connector (CN19), and remove the Coin BAT Sheet and
the Lithium Coin Battery.
HDD Guide
<N19>
<N19>
LAN Cable
SD-LAN PCB
FPC(Battery)
Ass'y
Connector(CN21)
Modem
Cable Sheet <N1>
<N1>
<N19>
Modem Module
Modem Cable
Lithium
Coin
Battery
Coin BAT Sheet
12. Remove the 2 Screws <N19>, and remove the Wireless
LAN Module and WLAN Half Thermal Plate.
13. Remove the 2 Screws <N1>, and remove the Modem
Module, Modem Cable Sheet and Modem Cable.
14. Remove the 2 Screws <N19>, and remove the DIMM
Holder.
<E1-8>
<E1-8>
Connector(CN23)
FFC(PAD)
15. Disconnect the 2 FPC(PAD, IO) and Cable(IO) from the 3
Connectors. (CN9,CN14,CN23)
16. Remove the 5 Screws <N41>, 2 Screws<E1-8> and
remove the Main PCB and Express PCMCIA Combo Slot.
Screws <N3> : DFHE5108ZA
Screws <N8> : DRSB2+10FKL
Screws <N19> : XSB2+3FNL
Screws <N41> : XSB2+5FNL
Screws <E1-8> : DXYN2+J8FNL
7-6
<N41>
<N41>
<N41>
<N41>
Connector(CN9)
Connector(CN14)
<N41>
Main PCB
Express PCMCIA
Combo Slot
FFC(IO)
Cable(IO)