Panasonic CF-19ADUAX M Series Service Manual page 29

7.1.11. Removing the IO PCB Ass'y
IO PCB Ass'y
1. Remove the 4 Screws <N2>.
2. Remove the 2 Screws <N41>.
3. Remove the IO PCB Ass'y.
Screws <N2> : DFHE5058ZB
Screws <N41> : XSB2+5FNL
7.1.12. Removing the Power PCB
<N1>
Power PCB
Power SW Cable
Connector
(CN780)
1. Remove the Screw <N1>.
2. Disconnect the Power SW Cable from the Connector
(CN780).
3. Remove the Power PCB.
Screw <N1> : DFHE5025XA
<N41>
FFC(IO)
<N41>
<N2>
<N2>
<N2>
<N2>
7-7
7.1.13. Removing the LED-Left and LED-
Right PCB
LED PCB Tape
FPC(LED Left)
LED-Left PCB
Connector(CN806)
LED-Right PCB
1. Remove the LED PCB Tape and Palm Rest WP Sheet R.
2. Disconnect the FPC(LED Left) from the Connector
(CN806).
3. Remove the LED-Left PCB.
4. Disconnect the FPC(LED Right) from the Connector
(CN801).
5. Remove the LED-Right PCB.
7.1.14. Removing PAD PCB and SW PCB
<N1>
Connector
(CN803)
Power SW Cable
Connector(CN802)
SW PCB FPC
1. Disconnect the 3 FFC(PAD) from the 3 Connectors
(CN800,CN803,CN805).
Palm Rest WP Sheet R
FPC(LED Right)
Connector(CN801)
<N1>
<N1>
FFC(PAD)
<N1>
Connector(CN805)
PAD PCB