Table of Contents
Advertisement
S1:
S2:
S4:
S5:
S1:Insulation S2:Pinching Cables
CAUTION
S3:Sharp Edge S4:Check Parts NO. S5:Others
Screw(N8)
HDD Guide
HDD Guide
HDD Guide
<Screw tightening torque>
Screw(N8) = 0.2 ± 0.02N·m ( 2.0 ± 0.2kgf·cm)
<Screw tightening order>
→
Screw(N8) =
→
→
→
Screw(N19) =
Ensure that the upper
Ensure that the upper
Ensure that the upper
claw and lower claw are
claw and lower claw are
claw and lower claw are
hooked.
hooked.
hooked.
Slide the FPC(Battery)
Slide the FPC(Battery)
Slide the FPC(Battery)
Ass'y.
Ass'y.
Ass'y.
S3:
Screw(N8)
Screw(N19)
→
Gasket(65TSV4-3-50)
Screw(N41)
FPC(Battery) Ass'y
Screw(N41)
Attaching the LAN CONN Holder
Screw(N19)
Diagonal view
Pass the Cable through
the cavity part of Holder.
*Note
Avoid catching between the Connector
and Holder or running over the top.
SD-LAN PCB Ass'y
Insert the FPC into the Main PCB.
Screw(N19)
Screw(N19)
Ensure that the Knob is fit
to SW when attaching.
DIMM Holder Ass'y
Screw(N19)
DIMM Holder
<Screw tightening torque>
Screw(N41) = 0.2 ± 0.02N·m ( 2.0 ± 0.2kgf·cm)
<Screw tightening order>
Screw(N41) =
0~0.5mm
Gasket(65TSV8-10.5-18)
0~1mm
Side surface
Insert the FPC as
Insert the FPC as
Insert the FPC as
shown and lock.
shown and lock.
shown and lock.
7-34
LAN CONN Holder
LAN CONN Holder
LAN CONN Holder
Slide the hook under
Slide the hook under
Slide the hook under
the Main PCB.
the Main PCB.
the Main PCB.
S2 Safety work
#FFF
RF SW Knob
Insert the hook.
Insert the hook.
Insert the hook.
→
0~0.5mm
EX
0~0.5mm
PC
Attach fitting to the left.
Attach to the DIMM Socket.
Pressure:
20~30N
PCMCIA Smart
Card Sheet
(2.0~3.0Kgf)
0~0.5mm
PCMCIA
Cover Sheet
Advertisement
Table of Contents
