Dk8 And Dk16 Piou/Pious Smdr Cable Connections - Toshiba Strata DK 16 Installation And Maintenance Manual

INSTALLATION-PERIPHERALS
SECTION 100-816-207
MARCH 1993
BASIC CONNECTION
*
DK8, QSMU
DK16, PIOU
or
DK16, PIOUS
*
QSMU,
PROGRAM 10-3
LED 04-OFF
BASIC WIRING (see: QSMU PIOU or PIOUS TTY and SMDR Wiring in Chapter 8 for more detail)
PIOU, SMDR Jack
Modular Pin No.
1
2
3
4
5
6
FIGURE 7-20

DK8 AND DK16 PIOU/PIOUS SMDR CABLE CONNECTIONS

7 VOICE MAIL OPTIONS
7.00 System Hardware Requirements
7.01 The STRATA DK8 and DK16 may be config-
ured to support Toshiba VP voice mail messaging
system or a customer-supplier voice mail system.
7.02 The DK8 must be equipped with a QSTU, and
the DK16 must be equipped with a KSTU, PSTU, or
PESU to support a voice mail system. The DK8
QSTU is equipped with two standard telephone
circuits; the DK16 KSTU is equipped with four
standard telephone circuits, the PSTU with eight,
and the PESU with two. A K4RCU subassembly
3-pair
Modular
Modular
Cord (7 ft. max)
Jack
50 ft. max
SMDR
24 AWG Wire
Modular
Twisted Pair
Jack
Modularized
PPTC1A-5M Adaptor
Modular Pin No.
To 6 To
To 5 To
To 4 To
To 3 To
To 2 To
To 1 To
DB25
Plug
Printer
or Call
Accounting
Device
Toshiba
PPTC1A-5M,
RS232, Modular
to DB25 Adaptor
RS-232
DB25 Pin No. Lead Name
3 RD
2 TD
6 DSR
20 DTR
8 CD
7 SG
4 Jumper to 5 RTS to CTS
must be installed in the DK16 Base Unit, and a
QRCU must be installed in the DK8 KSU. The voice
mail system can be connected to any standard
telephone circuit at the MDF block.
7.10 Toshiba VP Voice Messaging System
7.11 The STRATA DK8 and DK16 is designed to
support the full range of features offered by the
Toshiba VP provides various call routing, message
handling, and information management features,
including:
•
Automated Attendant
•
Call Forward to Voice Mailbox
•
Message Waiting Indication
7-28
DATA FORMAT:
• ASCII
• 8-bits
• No parity
• 1-stop bit
• QSMU: 1200 bps
• PIOU/PIOUS 300 or
• 1200 bps