Toshiba Strata DK 16 Installation And Maintenance Manual page 285

DIGITAL AND ELECTRONIC TELEPHONE BUTTONSTRIP TYPE
STEP
1 Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter the Program Number 38
Press CR.
3 Refer to the System Record Sheet and enter the
required port number. Example: Port 00, enter 0 0.
Press #. The system will display the present
4
telephone code.
5 Refer to the System Record Sheet and enter
the required telephone code number.
Example: Code 21, enter 2 1.
6 To Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to step 3 until all Program 38
data is entered.
C) To exit this program, press # # CR.
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
TABLE RM-AE
PROGRAM 38
ACTION
-35-
SECTION 100-816-600
MARCH 1993
DISPLAY/PRINTOUT
>MODE PROG
P
P 38
P38
P38 00
P38 00# 31
P38 00# 31 21
P38 00# 31 21
P38 ##
P