Toshiba Strata DK 16 Installation And Maintenance Manual page 289

STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 69
Press CR.
3
Refer to the System Record Sheet, and enter the required code
number (000 ~ 299).
Example: code number 001; Enter: 0 0 1.
The system will display the present account code number
assigned to 001.
Note:
The number of digits will be as defined in Program 60-4 .
4 A) Refer to the System Record Sheets, and enter the required
account code number.
Example: number 987654; Enter: 9 8 7 6 5 4.
B) To clear and erase all data enter (all caps)
N N N N N N N N N N N N N N N .
5 To Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to step 3 until all Program 69 data
is entered.
C) To exit this program, press # # CR.
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
TABLE RM-AI
PROGRAM 69
VERIFIABLE ACCOUNT CODE ENTRY
ACTION
-39-
SECTION 100-816-600
MARCH 1993
DISPLAY/PRINTOUT
>MODE PROG
P
P 69
P69
P69 001 NNNNNNNNNNNNNNN
P69 001 NNNNNN 987654
P69 001 NNNNNN 987654
P69 ##
P