Toshiba Strata DK 16 Installation And Maintenance Manual page 283

STEP
1 Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 34
Press CR.
3 Refer to the record sheet and enter the required
port number.
Example: Port 05, enter 0 5.
4 Press #. The present data will be displayed.
5 Refer to the record sheet and enter the required timing.
Example: 160 seconds, enter 1 6 0.
6 To Exit Program/Store Data
To store data, press CR.
A)
B) Continue returning to step 3 until all Program 34
data has been entered.
C) To exit this program, press # # CR.
NOTE:
Program 35 , use Type 2 procedure.
STEP
1 Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 36
Press CR.
3 Refer to the System Record Sheet and enter the
port number for the station that will have a Fixed
Call Forward button. Example: Port 00, enter 0 0.
Press #. The present data will be displayed.
4
5 Refer to the System Record Sheet and enter
the port to be forwarded to when the Fixed
Call Forward button is pressed. Example: Port 04, enter 0 4.
6 To Exit Program/Store Data
To store data, press CR.
A)
B) Continue returning to step 3 until all Program 36
data is entered.
To exit this program, press # # CR.
C)
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
TABLE RM-AB
PROGRAM 34
HOLD RECALL TIMING
ACTION
TABLE RM-AC
PROGRAM 36
FIXED CALL FORWARD
ACTION
-33-
SECTION 100-816-600
MARCH 1993
DISPLAY/PRINTOUT
>MODE PROG
P
P 34
P34
P34 05
P34 05# 032
P34 05# 032 160
P34 05# 032 160
P34 ##
P
DISPLAY/PRINTOUT
>MODE PROG
P
P 36
P36
P36 00
P36 00# NN
P36 00# NN 04
P36 00# NN 04
P36 ##
P