TOLL RESTRICTION ALLOWED/DENIED OFFICE CODES ASSIGNED BY CLASS
STEP
1
Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2
Enter Program Number 46
Press CR.
3
Enter class number (1 ~ 4).
Enter 6, 7, or 8 SPACE.
4
• 6
— to add codes to memory (allowed).
• 7
— to delete codes from memory (deny).
• 8 SPACE
— to display codes in memory (allowed codes).
5
Refer to the System Record Sheet and enter the office code or
office code group. Single
Press SPACE to enter more codes.
Press SPACE to temporarily store data. Press SPACE when
6
completed.
7
Continue returning to step 3 until all data input is completed for
this program.
8
To Exit this Program
Press # # CR.
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
TABLE RM-AT
PROGRAM 46-6 ~ 8
ACTION
*
. Group
.
-47-
SECTION 100-816-600
MARCH 1993
DISPLAY/PRINTOUT
>MODE PROG
P
P 46
P46
P46
Class Number (X)
P46
6, 7, or 8 (Y)
P46 X Y
ALLOW
–
or DENY
P46
P46 ##
P