Toshiba Strata DK 16 Installation And Maintenance Manual page 294

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
TOLL RESTRICTION TRAVELING CLASS OVERRIDE CODE ENTRY
STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 44 (Do not enter A or B)
Press CR.
3 Refer to the System Record Sheet and enter the required Toll
Restriction Class number (1 ~ 4).
Example: Class 1; Enter: 1.
The system will display the present override code assigned to
that class number.
4 Refer to the System Record Sheet and enter the required override
code number.
Example: 3456; Enter 3 4 5 6.
5 To Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to step 3 until all Program 44 data
is entered.
C) To exit this program, press # # CR.
STEP
1 Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 45
Press CR.
3 Enter the number 1.
The system will display the present dial plan code number (1 ~ 5).
Refer to the record sheet and enter the required code number.
4
Example: Code 2, enter 2.
5 To Exit Program/Store Data
A) To store data, press CR.
B) To exit this program, press # # CR.
TABLE RM-AN
PROGRAM 44 (A OR B)
ACTION
TABLE RM-AO
PROGRAM 45-1
TOLL RESTRICTION DIAL PLAN
ACTION
-44-
DISPLAY/PRINTOUT
>MODE PROG
P
P 44
P44
P44 1 NNNN
P44 1 NNNN 3456
P44 1 NNNN 3456
P44 ##
P
DISPLAY/PRINTOUT
>MODE PROG
P
P 45
P45
P45 1 1
P45 1 1 2
P45 1 1 2
P45 ##
P