Toshiba Strata DK 16 Installation And Maintenance Manual page 279

STEP
1 Enter the Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 19
Press CR.
Enter the number 1.
3
The present slot number will be displayed.
4 Refer to the record sheet and enter the required slot number.
Example: Slot 04, enter 0 4 CR.
5 To Exit this Program
Press # # CR.
NOTE:
Program 20 uses Type 2 procedure.
STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 21
Press CR.
Refer to the System Record Sheet, and enter the required port
3
number for the PDIU-DS.
Example: port 04; Enter: 0 4.
Press #.
4
The system will display the presently selected standard telephone
port number.
5 Refer to the System Record Sheet, and enter the required
standard telephone port number.
Example: Port 08; Enter: 0 8.
6 To Exit Program/Store Data
To store data, press CR.
A)
B) Continue returning to Step 3 until all Program 21 data
is entered.
To exit this program, press # # CR.
C)
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
TABLE RM-U
PROGRAM 19
BACKGROUND MUSIC SLOT IDENTIFICATION
ACTION
TABLE RM-V
PROGRAM 21
MODEM POOLING
ACTION
-29-
SECTION 100-816-600
MARCH 1993
DISPLAY/PRINTOUT
>MODE PROG
P
P 19
P19
P19
P19 1 NN
P19 1 NN 04
P19
P1 19 ##
P
DISPLAY/PRINTOUT
>MODE PROG
P
P 21
P21
P21 04
P21 04 # NN
P21 04 # NN 08
P21 04 # NN 08
P21 ##
P