Toshiba Strata DK 16 Installation And Maintenance Manual page 303

STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 50
Press CR.
3 Enter the number 6
The system will display the present dial zero timeout.
Refer to the System Record Sheet and change if required.
Example: 10, enter 1 0.
4 Exit Program/Store Data
A) To store data, press CR.
B) To exit this program, press # # CR.
STEP
1 Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 51
Press CR.
3 Refer to the System Record Sheet and enter the required
route plan number (1 ~ 8).
Example: Route plan 1, enter 1.
4
Enter 2, 3, or 4 SPACE
• 2
— To add area codes to table.
• 3 — To delete area codes from table.
• 4 SPACE
— to display area codes in table,
continue to press SPACE to display more codes.
Press CR to exit display.
5
Enter codes
press SPACE after each code entry.
6 Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to step 3 until all data has been
entered for this program.
To exit this program, press # # CR.
C)
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
TABLE RM-BC
PROGRAM 50-6
LCR DIAL ZERO TIMEOUT
ACTION
TABLE RM-BD
PROGRAM 51
LCR AREA CODES
ACTION
*
or and
>MODE PROG
P
P 50
P50
P50 6 06 10
P50 6 06 10
P50 ##
P
>MODE PROG
P
P 51
P51
P51 1
P51
P51
P51
P51 12
or
P51 ##
P
-53-
SECTION 100-816-600
MARCH 1993
DISPLAY/PRINTOUT
DISPLAY/PRINTOUT
2, 3 or 4
Plan No.
<— CODES
212